Bespoke Kitchen Fitting in Cricklewood NW2

Why Cricklewood Properties Choose Us

More affordable, good Victorian stock. Up-and-coming with significant regeneration plans. Our team works exclusively in NW London, bringing detailed knowledge of Barnet planning requirements and the specific challenges of Victorian terraces stock.

Planning Authority

Barnet LBC

Average Property Value

£550,000

Conservation Area

No

Typical Project Cost

£30,000–£120,000

How a Bespoke Kitchen Fitting Works — Step by Step

1. 1

   Kitchen Design Consultation and Brief

   Our kitchen designer meets with you at the property to establish the brief — cooking habits, storage requirements, appliance preferences, and the aesthetic direction. We survey the kitchen space precisely, noting ceiling heights, window positions, radiator locations, and the relationship to the dining area to design a kitchen that works with the room rather than against it.

2. 2

   Bespoke Design and 3D Visualisation

   A detailed kitchen design is produced in 3D — showing the layout from every angle, door profiles, handle choices, worktop material, and appliance positions. For in-frame kitchens we show the door and drawer proportions against the specific room dimensions. Multiple design iterations are reviewed until the scheme is finalised before any manufacturing commitment is made.

3. 3

   Structural Works and Wall Opening

   Where the kitchen renovation includes opening up to an adjacent dining room, a structural engineer designs the new steel lintel and the temporary propping sequence. The opening is made and the steel installed before any kitchen fitting commences. This work must be completed and the building control structural inspection passed before the kitchen is measured for manufacture.

4. 4

   First Fix Services — Plumbing and Electrics

   Hot and cold water supplies are repositioned for the new sink and any appliance connections. Electrical circuits are added or upgraded to support the oven, hob, extractor, fridge, dishwasher, and any under-counter appliances. Underfloor heating is laid if specified. All works are completed, tested, and approved by building control before the kitchen is delivered.

5. 5

   Preparation — Floor Levelling and Wall Preparation

   Kitchen floors in Victorian and Edwardian properties are rarely level — we self-level the screed or overlay the floor to achieve the flatness required for kitchen unit installation. Walls are checked for plumb and squared, and any areas of damp or hollow plaster are repaired. The kitchen fitter requires a finished surface to work from.

6. 6

   Kitchen Unit Installation and Setting Out

   Base units are installed first, using legs to achieve a perfectly level datum. Wall units follow, set to the correct height relative to the worktop. The kitchen fitter packs and scribe-fits units to walls and floors — in bespoke in-frame kitchens this scribing is part of the handcrafted quality. Appliance housings are installed and aligned.

7. 7

   Worktop Template, Manufacture, and Installation

   After units are installed, the stone worktop fabricator templates the precise worktop dimensions, including sink cutouts and hob cutouts. The worktops are manufactured and returned for installation typically 2–4 weeks later. Stone worktops are installed, joined, and polished on site. The sink and hob are set into the worktop and plumbed.

8. 8

   Appliance Commissioning and Decoration

   Appliances are installed and commissioned. Tiles or splashback panels are fixed between the worktop and the wall units. Decoration and any boxing-in of services is completed. The kitchen is thoroughly cleaned and snagged before handover. The completed bespoke kitchen represents the highest per-square-metre investment of any room in the NW London property.

Bespoke Kitchen Fitting in Cricklewood — Planning and Local Considerations

Cricklewood's Victorian and Edwardian terrace kitchens are good candidates for bespoke kitchen installation combined with opening up to the dining room. The NW2 market is price-sensitive relative to NW3 — semi-bespoke options (Neptune, Howdens Tewkesbury) offer excellent quality at accessible prices. The dual LPA building control applies to structural and services works. Good value-for-money positioning: the same kitchen design delivers more space here than in NW3 for comparable budget.

Frequently Asked Questions