Light Well Installation in Golders Green NW11

Why Golders Green Properties Choose Us

Large family homes, established community. Mix of Edwardian semis and 1930s detached. Our team works exclusively in NW London, bringing detailed knowledge of Barnet planning requirements and the specific challenges of Edwardian semis & 1930s detached stock.

Planning Authority

Barnet LBC

Average Property Value

£1,200,000

Conservation Area

No

Typical Project Cost

£8,000–£25,000

How a Light Well Installation Works — Step by Step

1. 1

   Survey and Feasibility Assessment

   We survey the external wall adjacent to the proposed light well, confirm the basement floor level relative to the pavement or garden, and check for underground services (drainage, gas, water, electricity) that may affect the excavation position. We also check whether the light well will be under the pavement or garden — both have different consent implications.

2. 2

   Planning and Pavement Licence (where required)

   Light wells under the public pavement require a licence from the highway authority (Camden, Westminster, Barnet, or Brent depending on location). Front-elevation light wells in conservation areas may require planning permission. We identify the consent route before any structural or excavation work is ordered.

3. 3

   Structural Assessment and Party Wall Considerations

   A structural engineer assesses the impact of the light well excavation on the existing foundation and any adjacent party wall. In terraced properties with shared party walls, a party wall notice must be served if the light well excavation is within 3 metres of the neighbour's structure. The engineer designs the retaining wall structure for the light well sides.

4. 4

   Excavation and Retaining Structure

   The light well is excavated by hand or mini-excavator to the required depth. The sides are retained by precast concrete sections, steel sheet piling, brick, or reinforced concrete panels depending on the depth and soil conditions. The bottom is waterproofed and connected to the basement drainage system to manage rainwater entry.

5. 5

   Waterproofing and Drainage

   The light well walls and floor are waterproofed using a cavity drain membrane or tanking system to prevent groundwater ingress. A gully or linear drain at the base connects to the existing basement sump or building drainage — keeping the light well clear of standing water is critical for the health of the adjacent basement wall.

6. 6

   Grille, Railing, or Glazed Cover Installation

   The top of the light well at pavement or garden level is fitted with a galvanised or stainless steel grille (with anti-slip properties for pavement-level positions), decorative ironwork railings for garden-level light wells, or a frameless glass cover where maximum light transmission is the priority. All covers are removable for maintenance.

7. 7

   Window Installation and Testing

   The new basement window — typically a timber-framed casement or steel Crittal-style frame — is installed in the opening created by the light well. The window must meet Part L thermal requirements and Part B fire requirements if the room below is a habitable room. The frame is sealed and pointed and the light well tested with a hose to confirm drainage performance.

Light Well Installation in Golders Green — Planning and Local Considerations

Golders Green light well projects in Barnet LBC are generally unrestrictive from a planning perspective. Rear garden light wells can often proceed without planning permission. The inter-war stock in NW11 has lower ground floor levels that are well-positioned for light well addition — adding natural light to utility rooms, home offices, or annexe bedrooms. Drainage to the existing soakaway or building drainage system must be confirmed. Good value-for-money relative to NW3 for equivalent light well specifications.

Frequently Asked Questions